Significant Projects of NIKA SERVICE

2025

Swiss Type CNC Lathe (9 axes) - Tsugami BW329ZE

The machine has three tool blocks for two spindles, which allows to expand the capabilities of the equipment, but at the same time, significantly complicates the launch and adjustment of such equipment at the Customer's site.

Successfully launched and set up production parts for this complex equipment, expanding its capabilities while navigating the challenges of its setup.

2024

Portal Vertical Milling Machining Center - Fulland DMC-2518

Portal milling machining center (X2500, Y1700, Z900, weight 28 500 kg).

Selected, assembled, and launched this large-scale machine at a customer site, manufacturing test parts to ensure optimal performance.

2024

Swiss Type CNC Lathe (8 axes) - Polygim DIAMOND 25CSBIII and Polygim DIAMOND 32CSBII

Two complex Swiss Type CNC Lathe with bar feeders.

Implemented these machines for serial parts production in the Ukrainian defense industry, including assembly and start-up.

2023

Vertical CNC Lathe with Milling Function - Honor Seiki VL-86CM (Tongtai Group)

Multifunctional CNC vertical turning center (carousel) with milling function (diameter Ø860 mm).

Deployed this multifunctional CNC vertical turning center to enhance production capabilities.

2022

5-axis Portal Milling Machining Center - Tongtai GT-630

5-axis portal milling machining center with a tilting rotary table (diameter Ø630 mm)

Selected technology and equipment for serial parts in the Ukrainian defense industry, providing consultations on supply and launch.

2021

Vertical CNC Lathe with Milling Function - Toshulin BASICTURN 2000

Multifunctional vertical turning center (carousel) with milling function (diameter Ø2300 mm).

Successfully delivered, assembled, and started up this equipment, manufacturing test parts.

Historical Milestones

2016

CNC Frontal Lathe - Proking BN-60х1000

Two CNC frontal lathe for machining turbine rings (Ø1100 mm, L1000 mm, weight 14,600 kg).

Consultations on the selection and supply of equipment for the Ukrainian energy sector. Setup and start-up at the Customer's site.

2014

First Specialized Online Tool and Equipment Etore

Pioneered online sales of specialized tools and equipment, expanding customer services.

2012

First Tongtai Machining Center in Ukraine - TMV-850A

Introduced high-quality Tongtai machining centers, known for their reliability in heavy production conditions.

Tongtai machining centers are significantly different in quality! They are serially supplied to many global automotive plants, which proves the endurance and quality of processing in heavy production conditions.

Tongtai Corporation's factories produce not only conventional machining centers, but also specialized lines with several machines and robots between them for large series.

For more than 10 years of supplying such equipment, our customers have hardly ever asked us for service or repair of Tongtai machines, which once again proves the high quality of the product!

2011

Launch of Technology for Machining Parts on Schiess VERTIMASTER VMG1.35

Collaborated with Schiess and Walter AG to develop machining technology for large parts, enhancing production efficiency.

The Schiess VERTIMASTER VMG1.35 is a very powerful machine capable of machining parts weighing up to 30 tons, up to 4 m wide, 5 m long and 2.5 m high in four axes.

Together with the specialists of the equipment manufacturer Schiess and the tooling leader Walter AG, the technology for machining the part was prepared. A program was written, a tool was selected, and the tooling and equipment were delivered to the customer's plant.

The introduction of Walter AG technology and tools at this machining center made it possible to shorten the pump manufacturing cycle and increase the Customer's production capacity for special pumps.

Programs for machining casing parts were tested, and later the production of pumps was started, fully utilizing VERTIMASTER VMG 1.35.

2011

Heavy CNC Boring Machining Center - Femco BMC135R

A heavy Horizontal CNC boring machine for machining housing parts for gas turbine production (X2400, Y2500, Z1500, weight 35,000 kg).

The equipment was selected for the complex tasks of the Ukrainian energy industry.

2010

Two Large Turning and Milling Machining Centers

AlexTech VT-50Ax4000 Big CNC lathe with milling function  (Ø860 mm, L4000 mm, weight 22,000 kg)

AlexTech VT-50Ax3000 Big CNC lathe with milling function  (Ø860 mm, L3000 mm, weight 19 500 kg)

The machines were selected and delivered for machining graphite rods for nuclear power plants and rotors for the power industry, respectively.

2010

First large project of 8 units of equipment - AlexTech Viper VT-23 - 4 pcs, VT-27G - 4 pcs

The first major project to launch equipment with a large number of units simultaneously.

The task of delivery, installation, adjustment and start-up with the adjustment of the part processing technology in the technological line of bearing rings production was completed.

2008

First Machining Center - DIAMOND 32CSB (6 axes)

Successfully launched the first Swiss Type CNC Lathe in Ukraine, marking a significant milestone in the company's growth.

The first machining center delivered and successfully launched by our specialists in Ukraine!

A representative of the manufacturer was sent to help with the launch.

Subsequently, our technicians were sent for training by the equipment manufacturer and successfully completed it.

This had a very positive impact on the growth of our professionalism and on further successful projects and launches at our customers.

2007

Year of foundation of NIKA SERVICE